GB-Air-Driven Gas Boosters

AB-Air-Driven Liquid Pumps

Key Features

Key Features
Specification

GB series gas booster pump products are mainly used in various occasions where the pressure of the gas source is high, the output pressure is required, and the flow rate is not required.

Some models can be used to pressurize special gases or to evacuate.

GB series air booster pump
Technical Data Sheet Pa=driving pressure Pi=input pressure Po=output pressure
Model	Ratio	Drive size（MM）	Min gas inlet（Bar）	Max gas outlet Po（Bar）	Gas outlet formula Po=	IN	OUT	Max flow standard（NL/Min）	Download
GB02	2.5：1	100	0	16.6	2Pa	NPT1/2"	NPT1/2"	522@Pi=7
GB04	4：1	80	1.2	33.2	4Pa	NPT1/2"	NPT1/2"	354@Pi=7
GB05T	5：1	80	1.7	41.5	4Pa+Pi	NPT1/2"	NPT1/2"	572@Pi=7
GB07	7：1	63	3.4	58.1	7Pa	NPT3/8"	NPT3/8"	252@Pi=7
GB08T	8：1	63	3.4	66.4	7Pa+Pi	NPT3/8"	NPT3/8"	362@Pi=7
GB10	10：1	50	6.5	83	10Pa	NPT3/8"	NPT3/8"	196@Pi=7
GB15	15：1	40	8.1	124.5	15Pa	NPT3/8"	NPT3/8"	164@Pi=10
GB25	25：1	32	15	207.5	25Pa	NPT1/4"	NPT1/4"	114@Pi=20
GB30	32：1	28	18	265.6	32Pa	NPT1/4"	NPT1/4"	91@Pi=20
GB40	40：1	25	25	332	40Pa	NPT1/4"	NPT1/4"	156@Pi=40
GB60	60：1	20	32	498	60Pa	NPT1/4"	NPT1/4"	112@Pi=40
GB100	100：1	16	40	830	100Pa	NPT1/4"	NPT1/4"	85@Pi=40
Based on static pressure, the air consumption is 1m³ when the air pressure is 7Bar. @ represents a condition: for example:100@Pi=7, it represents the flow rate is 100NL/min when the input pressure is 7Bar

The drive piston diameter of this series is 160mm, the booster pump drive gas inlet is G1/2", the drive air pressure is ≤8.3Bar. GB25, GB40, GB60, GB100 high pressure pump pump heads have exhaust cooling function.